INTRODUCTION
& DESCRIPTION
The digital blood analyzer is designed to
make the analysis simple. The cumbersome step
of calculations is deleted. The final result
of unknown test will be displayed directly
in concentration. There is no need of any
calculations. However optical density (O.D.)
is also given in case of optical density is
required to cross check the reading at any
time. A micro controller has been incorporated
in the system for accuracy precision and reproducibility
of findings.
Best quality eight numbers of optical built
in glass filters are included in the equipment
to cover complete visible range of wavelength
from 400 nm to 700 nm. The wavelength can
be set by rotation of the filter wheel. The
system works with square cuvette and only
1 ml reagent to be used. The system has AUTO
ZERO facility also
TECHNICAL
SPECIFICATION
TECHNICAL SPECIFICATIONS
Optional System : Glass Filters (8 Nos.)
Wave Length : 400 – 700 nm
Peak Wave Lengths : 400, 490, 520, 540,
590, 620, 650, 700 nm
(On wheel)
Auto Zero Facility
: In all filters (i.e. 400 – 700 nm)
| Optional System |
: Glass Filters (8 Nos.) |
| Wave Length |
: 400 – 700 nm |
| Peak Wave Lengths |
: 400, 490, 520, 540, 590, 620, 650,
700 nm (On wheel) |
| Auto Zero Facility |
: In all filters (i.e. 400 –
700 nm) |
| Display |
: LCD Alpha Numeric (16 x 1) |
| Detector |
: Highly Sesitive Photodiode Reagent
Volume : Minimum 1 ml |
| Reagent Volume |
: Minimum 1 ml |
| Cuvette |
: Square Cuvette 10 x 10 (Plastic) |
Kay Pad
|
: 3 x 2 Feather Switch Key Board |
| Light Source |
: 6 V, 10 W, Tungsten Lamp |
| Feeded Tests |
: Values of STD Conc./ Factors of
SUGAR,
UREA, CHOLESTROL, TOTAL PROTEIN, ALBUMIN,
URIC ACID, HAMEOGLOBIN, CHLORIDE, CALCIUM,
TRIGLY CERIDES, BUN, HDL CHOLESTROL
CREATINE, ALKALINE PHOSPHATE, SODIUM,
ACID PHOSPHATE BILIRUBIN, POTASSIUM
S.G.O.T, SGPT (DNPH Method) are already
fed. |
| Operating Modes |
: CALIBRATION / MEASUREMENT / PHOTOCOL |
| Readings |
: DIRECT READING IN CONC./O.D. |
| Cooling System |
: A fan inbuilt for Cooling |
| Dimensions |
: 325 x 260 x 120 nm |
| Weight |
: 4.5 kg (Approx.) |
| Input Voltage |
: AC Mains : 230 V, 50 Hz, 1 F AC. |
| Battery |
: 12 V |
|
| STEPS
OF OPERATION MODESTD.,
O.D./CONC.K6 O.D.SAMPLEK5 SCAN (+)DEC. +K4
SCAN/STOPK1 ENTERK2 SCAN (-)DEC. –K3
i. • Switch
ON the instrument (Given on Right hand of
the machine)
- Display will show ‘K – Blood
Analyzer’.
- Scanning starts, SUGAR, UREA, ……..
PHOTO COL.
ii. • To stop PRESS K1 at desired
TEST.
• It can restart by pressing K1 again.
• It can advance/retreat in steps
i.e. one by one by pressing K4 and K3, resp.
iii. • PRESS K2 ENTER
- Display will show MEASUREMENT
iv. • Select MEASUREMENT/CALIBRATION
by K1.
v. • PRESS K2 ENTER
|
Copyright © Kaycoindia. All Rights Reserved.